Brand line
FIHP Disposable Vapes
Source FIHP disposable vapes eu wholesale from PortVape, spanning 12000 to 200000 puffs with multi-flavour selector hardware across 7 catalogue models.
7 products · MOQ 10 units
FIHP builds its catalogue around rotatable multi-flavour hardware rather than standard single-reservoir sticks. Out of seven active models in our warehouse lines, six run multi-chamber setups ranging from dual-flavour barrels up to an eight-way rotary system. The remaining single-chamber device covers standard 20mL volume, giving buyers a clear path between basic high-capacity units and compartmentalised multi-profile hardware.
Independent Chamber Isolation Across Multi-Profile Hardware
Standard high-puff disposables pull from one large saturated reservoir, meaning a single burnt coil compromises the entire e-liquid load. The multi-chamber FIHP hardware isolates profiles into dedicated internal sections. On the FIHP 90K 3 in 1, the factory specifies three independent 14mL tanks feeding the coil block, giving a verified 42mL total volume without flavour bleed between selections. Larger units expand overall capacity while keeping separate channels intact: the FIHP 40K 2in1 holds 36mL across two profiles, the FIHP 60K 3in1 seals 54mL, the FIHP MULTI 120K 6 in 1 packs 64mL, and the flagship FIHP 200K 8 in 1 carries 80mL total fluid. An integrated selector switch rotates airflow and contact points to vaporise one profile at a time, keeping fruit notes distinct across tens of thousands of cycles.
Rotary Flavour Groupings and Profile Rotation
Multi-chamber barrels rely on balanced profile sets rather than random pairings. Devices in this line group complementary profiles that avoid clashing palate fatigue. A four-way grouping on the larger units pairs combinations such as watermelon ice, red bull, and strawberry kiwi, alongside blends like lemon peach, tropical fruit, pineapple coconut, and blue razz. Because users switch between sweet soda tones, menthol chill, and tart berry notes on the same battery base, daily coil stress spreads across separate wick zones rather than degrading a single blend over weeks of use.
Carton Selection for First Runs Versus Restock Rotations
For an initial trial order, FIHP 12k offers a standard single-tank format with a 1.0Ω mesh coil and a 20mL fill, making it the simplest benchmark for build quality. Retailers and individual buyers moving directly into multi-tank formats get the most direct entry with the FIHP 36K 2in1 (32mL) or FIHP 40K 2in1 (36mL), both housing an 850mAh battery for longer intervals between Type-C charges. High-volume carton restocks shift heavily toward FIHP 60K 3in1 and FIHP 200K 8 in 1, where buyers consolidate multiple menu profiles into a single physical unit.
Strength Options Across the Line
Every FIHP device in our stock arrives with factory options for 2% (20mg/ml) and 5% (50mg/ml) nicotine salt strengths. The internal battery specs match output needs: 650mAh on the 12K, 60K, 90K, 120K, and 200K units, stepped up to 850mAh on the 36K and 40K dual-flavour frames. All variants recharge via bottom Type-C ports, with digital indicator panels on six models monitoring battery percentage and active chamber status. We supply all models starting from 10 units per carton.
Brand buying questions
How does flavour switching operate on the FIHP 200K 8 in 1?
The FIHP 200K 8 in 1 uses a mechanical dial near the mouthpiece or base that shifts the airflow port and internal electrical contacts between the eight isolated fluid sections. Turning the selector engages the chosen profile while keeping the remaining chambers sealed from airflow.
What is the exact tank configuration on the FIHP 90K 3 in 1?
Factory specifications for the FIHP 90K 3 in 1 state a 42mL total e-liquid capacity divided into three separate 14mL tanks. Each tank feeds its own vaporisation path, preventing cross-contamination between the three loaded flavours.
Which multi-tank FIHP model works best for a first order?
The FIHP 40K 2in1 serves as the practical entry point. It carries 36mL total e-liquid across two switchable profiles, features a larger 850mAh rechargeable cell, and avoids the operational complexity of four-way or eight-way rotary dials on a first carton.
Can I mix 2% and 5% nicotine strengths within the same carton?
Units pack in 10-piece factory boxes per specific strength. You can order 2% for one box and 5% for another across your total order, but individual 10-unit boxes cannot be split between different nicotine ratios.
When should reorders shift from dual-tank to 6-in-1 or 8-in-1 models?
Reorders typically shift to the FIHP MULTI 120K 6 in 1 (64mL) or FIHP 200K 8 in 1 (80mL) when buyers want to minimise carrying multiple loose devices while offering varied menus in one physical unit.